1. Example of extreme value distribution 1.1. This figure shows the result of a set up of an extreme value distribution in the post processor. (Below it you will find a step by step explanation of how to set this up). 1.1.1. Step by step setup 1. In this example a condition space has been created on the Flex example task where wave height (Hs) and peak period (Tp) are varied. 2. The results from the run has been filtered to get Axial Force from all conditions. 3. Merge the max values of all axial forces by using the Condition Result Merger. 4. Add a distribution filter and configure it as a Gumbel distribution 5. Plot the axial force gumbel distribution plot