Logo SIMA Documentation
This module only:
?
  • Toggle checkbox to restrict the search to the current module( such as RIFLEX,SIMO,etc.).
  • You can control the search by using the following operators:
  • Wildcards:
    • *node (Words ending with node)
    • node* (Words starting with node)
    • *node* (Words containing node)
  • Title heading:
    • title:node (Word node in title)
  • Keyword ranking:
    • sand^10 material (sand is 10 times more important than material)
  • Keyword exclusion and inclusion:
    • node +fixed -parameters (must contain fixed, might contain node and must not contain parameters)
Logo

RIFLEX

    • User Guide
      • RIFLEX modeling from scratch in SIMA
      • RIFLEX Task
      • RIFLEX Location
      • Slender system
        • Supernodes, lines, line types, etc
          • Reference Frame
          • Supernode
          • Line
          • Line Type
          • Stress Joint Line Type
          • Local Element Axis
          • Slender System Connection
          • Support Vessel
          • Main Riser Line
          • Winch
        • Cross Sections
          • Axisymmetric cross section
            • Examples of hysteresis modeling
          • Axisymmetric cross section with coupled axial/torsional strain
          • Thin-walled Pipe Cross Section
          • Double Symmetric Cross Section
          • General Cross Section
          • Chain Cross Section
          • Fibre Rope Cross Section
            • Fibre Rope Model
          • Fibre Rope Wizard
          • Fish Net
        • Components
          • Nodal Body
          • Ball Joint Connector
          • Flex Joint Connector
          • Internal Fluid
          • Global Spring
          • Geotechnical model - Axis pile resistance
          • Geotechnical Spring
          • Tubular Contact
          • Pipe-in-Pipe
          • Roller Contact
            • Roller
          • Tensioner
          • Elastic Contact Surface
          • Regular 3D bottom
          • Geotechnical model - Clay Material
          • Geotechnical model - Sand Material
          • Drag Chain
          • External Wrapping
        • Wind Turbine
          • Generic Internal Controller
          • External Java Controller
          • External Bladed Style Controller
          • HAWC2 Import
        • User Defined Element
          • Interface Userderdef_element_init()
          • Interface Userderdef_element_calculate()
          • Interface Userderdef_element_finish()
        • Load Models
          • Hydrodynamic Load Models
      • Analysis
        • RIFLEX Static Calculation Parameters
          • Key parameters
          • Static Load Sequence
          • Static Load Components
          • Static Storage
            • Mass summary
        • Dynamic Calculation Parameters
        • Eigenvalue Calculation Parameters
        • VIVANA Calculation Parameters
        • DNV OS F201 combined loading
        • DNV OS E301 mooring capacity
        • ISO 13628-7 Combined Loading Analysis
        • Tension and curvature capacity check
      • Matrix Plot Result
    • Theory
      • Introduction
      • Finite Element Formulation
      • Static Catenary Analysis
      • Static Finite Element Analysis
      • Dynamic Time Domain Analysis
      • Eigenvalue Analysis
      • Load Models
      • Motion Transfer Functions
      • Contact Formulation
      • Result Post-Processing
    • Input Reference
      • Introduction
      • System Specification
      • Main Types of Analysis
      • How to Run the Program
      • Input to INPMOD
        • General Control Data
        • Slender system
          • Riser type specification
          • Standard system SA
          • Standard system SB
          • Standard system SC
          • Standard system SD
          • Standard system AR
            • Control data
            • Seafloor contact
            • System topology
            • Boundary conditions
            • Support vessel
            • Global springs
            • Kill and choke lines
            • Rigid supernode connection
          • Line and segment
          • Seafloor contact specification
          • Wind turbine
            • Wind turbine specification
          • Local element axis
          • Main riser line
          • Elastic contact surface
          • Pipe-in-pipe contact
          • Geotechnical spring
            • Input reference
          • Soil layer profile
          • Stress joint
          • Airfoil coefficient library
          • Winch
          • Userdefined element
          • Potential flow library
          • Shared nodes (under development)
        • Cross sections
          • Thin walled pipe cross section
          • Axisymmetric cross section
          • Coupled axial torsion cross section
          • Fibre rope cross section
          • Doublesymmetric cross section
          • Partly submerged cross section
          • General cross section
        • Components
          • Body
          • Ball joint
          • Flex joint
          • Internal fluid
          • Seafloor contact
          • Roller contact
          • Tubular contact
          • Tensioner
          • Soil (PISA)
          • Drag chain
          • Marine growth
          • External wrapping
        • Environmental Data
        • Support Vessel Data
        • Floater Force Model Data
        • Additional Input Files
          • Airfoil library file
          • Wind turbine internal blade and power control input file
          • Wind turbine external blade and power control input file
          • Wind turbine internal yaw control input file
        • References
      • Input to STAMOD
      • Input to DYNMOD
      • Input to OUTMOD
      • Appendix A: Hydrodynamic load models
      • Appendix B: Modelling
      • Appendix C: Analysis settings
      • Appendix D: Extract results
      • Appendix E: System settings and licenses
      • Appendix F: Mass and inertia summary
      • Appendix G: Sign convention for internal loads
      • RIFLEX Release Notes
RIFLEX
  • Bibliography
  • Conditions
  • Metocean
  • New and Noteworthy
  • Optimization
  • Post Processor
  • Report Generator
  • RIFLEX
  • SIMA Documentation
  • SIMA How-tos
  • SIMO
  • User guide
  • VIVANA
  • WAMIT
  • Wind Field
  • Workflow
  • RIFLEX
  • User Guide
  • Slender system
  • Components
  • Global Spring

Global Spring

This component may be used to define arbitrary spring stiffness for translation or rotation in a global direction or in a global plane.

Internal Fluid Geotechnical model - Axis pile resistance

This page was built using the Antora default UI.

The source code for this UI is licensed under the terms of the MPL-2.0 license.